Here’s a basic but thorough tutorial on how to back up your hard-drive data – from NewEgg. Looking for NewEgg Coupons? click the link.

With the rise of the technological age, laptops have become as commonplace as the home computer once was. In some instances, the laptop has replaced the desktop entirely. One of the primary reasons for the laptop’s popularity is its mobility. This mobility, however, can lead to increased wear and tear, and unexpected damage.

Because laptops are designed to be mobile, they are more prone to being damaged. Aside from the typical wear and tear resulting from the laptop’s mobility, the laptop is at greater risk of damage from an accident. There are many common ways to damage a laptop: accidentally pouring coffee on it, dropping it, running it over, or even sitting on it. Laptops can be rendered unbootable by physical damage to the case.

Mostly, laptops are used as secondary computers, or are wired to office networks; this allows data on laptops to be backed up in other locations. In the case of data loss, the important data from the laptop is stored in a different location. Backup utilities use this connectivity to schedule the automatic backup of files to a desktop computer, or a file server.

In most cases, laptop purchases include a recovery disk CD. The recovery CD contains the version of the hard disk that exists before the laptop is ever used. If the user’s hard disk fails, or the user wants to re-write or re-install the laptop, a full reinstall is performed by booting up the laptop from a recovery CD. In the case of data recovery, after the system has been re-installed, a full restore can be performed from an existing backup.

It is important to note that the laptop recovery CD is not the same as the Windows recovery disk. The data recovery disks are different from data recovery programs. When the computer fails to boot then we use the Windows recovery disk. It is used in both desktop and laptops. It restores the system files in Windows to their original versions. Users can boot up the disk and recover data by using recovery disks to restore hard disk data; such disks are available at backup and recovery software vendors.

Some laptops come with intelligent hard disks, which help to prevent loss of data. The Self-Monitoring Analysis and Reporting Technology – or SMART technology – informs the computer’s user of the likelihood of hard disk failure. A user with a laptop containing SMART disks would be informed if a hard disk crash were inevitable. This affords the user enough time to back up important data from his or her hard disk. Additionally, it gives the user the luxury of having the service center diagnose the computer before the hard disk fails.

Laptop recovery services are available to owners in case of accidental damage. These are full service repair bureaus, in that they check not just the hard disk, but all of the computer’s parts. The laptop’s owner sends it out to the service center for a checkup, a diagnostics test, data recovery, or some other kind of repair. In the case of laptop data recovery, the hard disk is isolated, and a copy of it saved prior to the start of repairs.

Laptop data recovery process is longer than desktop data recovery. There are also several additional causes of laptop damage and hard disk failure. There are, however, different laptop recovery solutions available depending on the scenario, whether it be hard disk failure, boot up failure, or data loss.

Data recovery refers to the recovery of information that is lost because of physical injuries such as damaged disks and tapes or an impaired system. There is lots of free software for data recovery that anybody can download and use.

There are a variety of ways to lose files and data: when formatting, while installing a new operating system, when deleting by mistake and virus corruption. In all computers these problems can occur at any time.

You can best guard against data loss by pro-actively managing your system. You should always have a back-up system for your critical data. When the unthinkable does occur, having the backup will surely simplify the situation.

There are several ways of recovering lost and damaged files. If the lost information is a really urgent matter, the best thing to do is bring your issue directly to the data recovery businesses that possesses the professionals to get the job done.

However, if you believe you are smart enough to know what to do and you have technical computer and storage device knowledge, then you have two choices: buy the data recovery software package or go online and download a free data recovery program.

Some data recovery programs are free to use, while others can be costly. Software packages may cost a lot however they can actually have many advantages (such as support) for the user. People might ask for donations for downloading free recovery software.

What should you do if you accidently format your drive without the data saved in backup?

The service providers for data recovery will provide the data recovery service for their client only. Disk-swap activities should be avoided in order to prevent further data damage.

It is recommended to not download the install recovery software on the same computer. You’ll need to move to a different PC, download the file to a flash drive and, then, run it straight from there.

It is also suggested that you avoid sharing recovered files on the same hard drive.

There are many online programs that offer free data recovery. Should any issues occur while downloading or installing the program, press the cancel or stop button. This is a possible indication of a malfunction in your hardware.

Be sure to do a little research before you think of downloading free recovery software to deal with the information that was lost. Always keep caution in the forefront of your mind when dealing with freeware, to avoid any more issues.

Don’t be taken in by sites that offer free data recovery programs; they are often malware. In other cases they may claim the program doesn’t cost anything however you will soon learn that these are only demo versions and eventually you must buy the actual program to have the advantages or extra features. There are lots of free downloadable software for data recovery

If you want to know how to move a whole site database from one host to another (say, from Godaddy to Dreamhost), this article is a must read. It will show and explain the whole process of exporting and importing a database (or to be more precise, all of its tables) using phpMyAdmin, the default MySQL database administrator. It is meant for those who don’t have Administrator access to phpMyAdmin (and cannot create databases from inside phpMyAdmin).

Let’s begin. First, you need to export your website’s database tables from the old host. To do so, access phpMyAdmin via your hosting panel (it’s Domain->Databases->DBWebAdmin for Plesk, and CPanel should have something similar), click on the database name (so that you see all the tables in the main window), then click on the “Export” tab at the top.

You should see the following export window. Click “Select All” to select all the tables and make sure the SQL radio button is checked. At the bottom, check “Save as file”, put in a file name (in this case it’s “mydb”), select Compression: “zipped” or “gzipped” to make the file smaller (this will help a lot if your host has a limit on the size of the database and tables you can upload) and click “Go” to get the file ( you may have to wait for a while, especially if the web server is slow and the file is big). Optionally, you may change the other parameters if your host told you that you need to or you know what you’re doing.

After you’ve saved the file, you need to create a new database at your new host. It is very desirable to assign it the same name, username and password as the old one; because otherwise your site won’t work and you’ll have to change the database settings inside the website configuration file (usually config.php or something like that). Go to your hosting panel and create it (I assume you know how to do it).

After it’s ready, open the phpMyAdmin for the new database and click on the database name ((like you did for the old one), only this time there should be no tables present and you should continue by clicking on “Import”. Here you need to select the file you just saved to your computer and click on “Go” (the other options are good by default in most cases).

After a while (depending on the speed of the server and your Internet connection), you should see an “Import has been successful” message and the tables of your database appear in the left window.

In the rare case when your database is bigger than the upload limit, you will have to export and import tables part by part (i.e. export/import the first 20, then the next 20 and so on). Kind of hard, but at least you can do it.
Now all you have to do is copy the contents of the “httpdocs” or “public_html” to you new host via FTP and optionally modify the files which contain the database name, password and username (search Google to find out how to do it for your software, like “how to change database username in Joomla”), then, if you already moved your domain name or registered another one (and modified the proper files), you should be able to access your old site on the new host. Congratulations!